Narrowboats and Widebeams, custom built to your specification. Quality from start to finish.
The cruiser stern was designed for the holiday market; it provides a large open space where fellow boaters can join the helmsman with plenty of room for socialising. The deck also has a protective guard rail round the outer edge which helps to prevent kids/pets falling off.
The design of our boats enables us to offer an amazing choice of options which allow you to personalise your boat just how you want it. Our designers will happily give you all the help you need to make the most of our bespoke level of service in order to achieve the design which fits in perfectly with your lifestyle.
The large saloon is designed for freestanding furniture giving the ideal living and social area. Hand crafted units and under gunwale display cabinets containing 230V power sockets, aerial and satellite points enabling easy fitting of most audio/TV systems. The saloon can also easily accommodate a dinette which can be converted for an additional two berths.
A galley that will certainly impress your friends and family... Whether it is situated aft or amidships, combined with the saloon it really does compliment the feeling of space. The galley has a hand crafted overhead cupboard suitable for a microwave, full size cooker and 230V fridge/freezer. You could even have solid granite worktops and ingenious magic corner units for easy access.
Intelligent design makes use of this space. It is equipped with a modern full size quadrant shower cubicle with mixer unit, pump out (or cassette) toilet and a contemporary washbasin giving you all the luxury of home.
Designed for a peaceful environment, the bedroom has an abundance of storage. With its 2 full height wardrobes, overhead cupboard with reading lights and the all important finishing touches, you will struggle not to be impressed.
The Venice is available as a Deluxe or Superior model.
View Comparison Chart
In contrast to many boat builders we don’t ask for a massive deposit up front to fund the building process. We have a very simple 5 step process, in order to make buying as easy and as simple as possible.
Step 1. We need a little commitment from you of just £1000, which allows us the time to fully design the boat, agree the specification and produce the detailed CAD drawing.
Step 2. Once step 1 has been completed, a 10% deposit is necessary to commence the manufacture of your boat.
Step 3. Once the hull has been completed and the boat has received its finish paintwork we require a further 40%.
Step 4. After the boat has completed its fit-out and passed quality control, it is delivered to Evesham where you will be able to fully inspect it, after which a further 40% would be required.
Step 5. Finally, the remaining 10% would be payable only when we have commissioned the boat, completed your handover and river trial and you are completely satisfied.
It means that, apart from the initial deposit, you only ever pay for work that has actually been completed. Together with a
British Marine Federation
based contract it would be hard to find better peace of mind.
Our boats are designed and constructed to the Recreational Craft Directive.
Prices are available
on request
or call our sales team on 01386 768 500
Click for a larger view | Optional extras may be shown in example layouts above
You can view a larger slideshow of these images, click any image to start the slideshow.
| Steel Plating: | 12mm / 6mm / 5mm / 4mm | Insulation: | Sprayfoam |
| Style: | Cruiser stern | Handrail: | Integral roof handrail |
| Decks: | All self draining | Anodes: | 8 x 2.5kg magnesium anodes |
| Weed Hatch: | Quick release | Stern doors: | Steel & lockable |
| Rubbing strakes: | Two full length | Bow doors: | Hardwood, glazed & lockable |
| Gas locker: | To hold 2 x 13kg bottles | Windows: | Single glazed |
| Bow locker: | Fitted as standard | Fuel tank capacity: | 235 litres (52 gallons) |
| Stern locker: | n/a | Water tank capacity: | 500 litres (110 gallons) |
The bow is flared to help prevent the paintwork from damage. The gas/forepeak locker is designed to house two 13kg propane gas cylinders and is fitted with an automatic changeover valve and gas isolation tap.
Bow storage lockers are fitted as standard.
The roof has six eyes for attaching fenders to the craft, and a centre eye for the centre rope attachment.
Roof hatch is of steel construction with brass runners. Cast steel 'T' stud mounted on bow section and two turned dollies mounted on the stern for mooring rope attachment (one of these has a vent for the fuel tank). Steel eyelets are fitted on the bow for front fender attachment.
The headroom is 6ft 1inch in the lowest area.
Barrus Shire 45hp fitted (43hp Barrus Shanks fitted on Deluxe models); 4 cylinder; keel cooled; hospital silencer; 50 and 240 amp alternators; PRM 150 hydraulic gearbox; Aqua Drive/Python Drive; 90Ah starter battery; standard engine control panel (A Barrus De-luxe control panel which includes tachometer, oil pressure gauge, water temperature gauge, warning lights & alarm is fitted as standard on the Superior model).
Webasto central heating system running 3 high quality radiators and heated towel radiator, through a 55 litre twin coil calorifier with immersion. This system is also connected to the engine cooling circuit, which will also provide hot water. The unit is fitted with a timer to allow you to control the running time on a daily basis.
The water tank is stainless steel, fully baffled, situated in the bow of the boat and filled from the well deck. The capacity of the tank is approximately 500 litres (110 gallons). Hot water is provided by the calorifier , which transfers heat from the engine cooling system, as well as the Webasto heating unit and an immersion heater when connected to 240V supply.
240V System
240V power is supplied by a 3000W Victron inverter incorporating a 120A charger; RCD (bespoke digital control panel on the Superior model); shore power socket and a generous number of 240V sockets fitted throughout;
12V System
12V power supplied by 4 x 125Ah quality Leisure batteries charged from engine alternator and inverter to main fuse distribution panel. Batteries are designed for regular charging and discharging.
A combination of 18inch port holes and 21inch x 42inch windows are used throughout the boat. The windows have full hoppers with removable glass for maximum ventilation.
Colour
We offer a wide choice of colours. All paint finishes are sprayed two part polyurethane paint offering greater scratch resistance. All decks, gunwales and roof section are treated with non-slip finish for safety.
Woodwork
We also offer choice of ash, oak, beech & cherry faced plywood with matching hardwood trims. Units/cupboards are handmade from veneer faced block board (NO MDF!)
Fixtures and fittings
We offer a choice of brass on the Deluxe model and chrome on the Superior model. An upgrade to chrome is available on the Deluxe model.
Flooring
We offer a choice of flooring from carpet to Karndean which reproduces the colour, texture & appearance of the natural products that it replicates thus giving a virtually damage and stain resistant floor.
©2011 Heritage Boats of Evesham: Evesham Marina, Kings Road, Evesham, Worcestershire, WR11 3XZ | Tel: 01386 768 500 Fax: 01386 761 094
Website Design: Rainbow Digital Media